Skip to content
NUMBER
PLATE HUB
4D ACRYLICA pair of 4D number plates showing the flat black faces and raised acrylic edges.
Front & rear · acrylic finish
THE DETAILClose-up of raised 5mm black acrylic digits on a white plate.
5mm digit detail shown

RAISED ACRYLIC DIGITS

4D number plates.

Solid black acrylic digits. Crisp edges. A raised finish that catches the light from every angle.

£39.97for the front & rear pair shown

4D 3mm · 520 × 111mm
Untinted · standard spacing · no badge · no border.
Standard shipping £4.99; free on orders over £40. Other configurations change the price.

Build your plates

Choose your size, digits, badges and border in the builder.

Finish
Raised black acrylic digits
Digit depth
3mm or 5mm
Choose
Front, rear or front & rear

The builder loads as you reach this section.

NUMBER PLATE HUB

Build your plates.

Preview Controls

Show plates
Zoom

Front plate

520 × 111 mm

Rear plate

520 × 111 mm

Step 1Enter your registration and choose your spacing

Step 2Choose Your Plate Style

Placement

Step 3Select Your Plate Size

Loading plate options…

Plate totalLoading price…

LOOK A LITTLE CLOSER

It’s all in the edges.

Printed digits sit flat. Gel digits have a rounded face. 4D acrylic has a flat face and a defined edge, giving each character a sharper, more sculpted profile.

3mmA defined raised finish.
5mmExtra depth, the same flat face.
Close-up of raised 5mm black acrylic digits on a white plate.
5mm acrylic digit detail.

THE DETAILS

Know what you’re choosing.

Start with a standard plate or choose a compatible alternative size in the builder.

Finish
Raised black acrylic digits
Digit depths
3mm or 5mm
Standard size
520 × 111mm
Plate options
Front, rear or front & rear
Standard colours
White front · yellow rear
Registration
Made with your existing registration. Registration entitlement is not included.

3mm or 5mm acrylic digits?

These measurements describe the depth of the acrylic characters, not the overall plate dimensions. Both choices have flat black faces and defined edges. Choose 3mm for a shallower raised profile or 5mm for greater depth. Compare the physical close-up photographs to judge the difference.

Plain 4D or 4D Gel?

Plain acrylic leaves the flat character face exposed. 4D Gel adds a domed gel top to the acrylic base, changing the face and profile of the digit. The 3mm and 5mm options describe the acrylic base; the gel top adds to the finished profile.

FROM YOUR SCREEN TO YOUR CAR

Three steps to your plates.

  1. 01

    Make them yours.

    Enter your registration. Choose the plate size, digit finish and details.

  2. 02

    Check every detail.

    Review your front and rear plates, then complete checkout.

  3. 03

    Send your documents.

    Follow the document instructions after ordering. Production follows the required checks.

BEFORE YOU ORDER

Your questions,
answered.

What is the difference between 3D and 4D plates?

3D gel digits have a rounded, domed face. 4D digits use solid acrylic with a flat face and defined edges. 4D Gel combines an acrylic base with a gel top.

Can I order just one plate?

Yes. Choose Front, Rear or Front & Rear in the builder. The displayed total updates to match your selection.

Are raised digits allowed on the road?

Raised characters are permitted, but the complete plate must meet the applicable rules, including character style, spacing, colours, material and markings. A raised finish alone does not make a plate road legal. Check the GOV.UK guidance linked below.

Number plate rules on GOV.UK ↗
Which documents will I need?

You need proof of your name and address, plus evidence that you can use the registration. A V5C, V750 or V778 can establish entitlement. Check the full GOV.UK list linked below for accepted documents.

Accepted documents on GOV.UK ↗

Your registration.
Your choice of finish.

Build your plates