Skip to content
NUMBER
PLATE HUB

Guides

Number plate sizes.

A standard car plate is 520 × 111mm. If you want a shorter plate, enter your registration in the checker below. Measure the mounting space on your vehicle before changing size.

Which short plate size fits your registration?

Check the character limits below or enter your registration to compare short plate sizes. Measure your vehicle’s mounting area before choosing.

Use the character limits to compare sizes. The checker becomes available when the page finishes loading.

Short plate dimensions and character limits
Plate sizeDimensionsMax. charactersYour result
Short 18"457 × 111 mm7Not checked
Short 16"406 × 111 mm6Not checked
Short 14"356 × 112 mm5Not checked

Results assume printed digits, standard spacing and no badge. They check size limits and current availability, not road legality or the fit on your vehicle. Check the complete configuration in the builder.

Configure short plates

Measure your existing plates

Measure width and height in millimetres. Then measure the usable mounting space, allowing for trim, cameras and any holder. A standard car plate is 520 × 111mm.

Use the short-plate checker

Enter your registration to see the shortened formats offered by our builder. If a size is unavailable for that registration, choose a longer plate. Digits are not reduced in size to make them fit.

Check front and rear separately

A car can have different mounting space at each end. Measure both before ordering a pair. Motorbike plates use a separate two-line layout and their own character-size rules.

Sizes in the builder.

Available plate dimensions. Check compatibility and availability in the builder.
Plate sizeWidthHeightCharacter limit*
Standard (20")520 mm111 mmChecked in builder
Hex 20"508 mm111 mm7
Hex 18"457.2 mm111 mm6
Hex 16"406.4 mm111 mm5
Hex 14"355.6 mm111 mm4
Short 18"457 mm111 mm7
Short 16"406 mm111 mm6
Short 14"356 mm112 mm5
Range Rover533 mm133 mmChecked in builder
11x8 (4x4)279 mm203 mmChecked in builder
Motorbike 9×7228.6 mm177.8 mmChecked in builder
Motorbike 8×6203.2 mm152.4 mmChecked in builder
Motorbike 7×5177.8 mm127 mmChecked in builder
Motorbike 9×3228.6 mm76.2 mmChecked in builder

*Format limits only. The selected registration, badges and other options may restrict a combination further.

Check your registration in the builder

Count characters, not the space

AB12 CDE has seven characters. A1 ABC has five. The space between the two groups is not another character, but the plate still needs room for legal spacing and margins. The checker uses the size limits available in our builder.

Before ordering a shorter plate

Measure the gap between the vehicle’s mounting points. Also look for marks, holes or a recess that the new plate might leave exposed. Our standard rectangular holders are not offered for shortened plates.